Pharmaceutical production suite with stainless steel process vessels, skids and orbital-welded pipework in a clean room

Pharmaceutical & Biopharma

PFA-Lined Valves for Pharmaceutical & Biopharma Manufacturing

Fluoropolymer-Wetted Flow Control for API Synthesis, Purified Water and CIP

Pharmaceutical and biopharmaceutical manufacturing demands absolute control over product purity and process sterility. From active pharmaceutical ingredient (API) synthesis to final formulation, aggressive chemicals including strong acids, solvents, and cleaning agents must be handled without introducing contamination or compromising batch integrity.

GFT9 manufactures PFA-lined valves, sample valves and sight glasses in the Clean Room Series, with electropolished stainless steel bodies and virgin PFA linings. They give chemical resistance and cleanable wetted surfaces for pharmaceutical production.

Our products serve critical functions across the pharmaceutical value chain: chemical transfer in API synthesis, sampling for quality control, process monitoring in formulation, and Clean-in-Place (CIP) system integration.

View Clean Room Product Range

Why PFA

Why Pharmaceutical Manufacturing Requires PFA-Lined Components

Pharmaceutical production presents unique material compatibility challenges. Process fluids range from highly acidic (hydrochloric acid, sulfuric acid) to strongly alkaline (sodium hydroxide cleaning solutions), with organic solvents (dichloromethane, alcohols, acetone) used throughout synthesis and purification stages.

The Contamination Challenge:

Conventional metallic valves—even high-grade stainless steels—can leach metal ions into process streams when exposed to aggressive chemicals. In pharmaceutical applications, even trace contamination at parts-per-billion levels can compromise product quality, trigger batch rejection, or create regulatory compliance issues. Metal ion contamination is particularly problematic in API synthesis where it can catalyze unwanted reactions or appear as impurities in final products.

Additionally, surface roughness in conventional components creates areas where product residue accumulates, complicating cleaning validation and increasing cross-contamination risk between batches.

Why PFA is the Solution:

PFA (Perfluoroalkoxy Alkane) resists the process chemicals typical of pharmaceutical production:

• Resists mineral acids (HCl, H₂SO₄, HNO₃); limits in the table below
• Withstands organic solvents including chlorinated compounds, alcohols, and ketones
• Compatible with oxidizing agents used in cleaning (sodium hypochlorite, hydrogen peroxide)
• On request: FDA declaration for the PFA wetted parts

By combining electropolished stainless steel bodies with virgin PFA linings, GFT9 Clean Room Series products deliver the mechanical strength required for process pressures while maintaining the chemical purity pharmaceutical applications demand.

Applications

Applications Across Pharmaceutical Production

Pharmaceutical manufacturing facilities require chemically resistant components at multiple process stages. GFT9 Clean Room Series products serve critical functions throughout API synthesis, formulation, and support systems.

API Synthesis and Chemical Processing

Active pharmaceutical ingredient production involves multi-step chemical reactions using aggressive reagents. PFA-lined ball valves control feed streams of acids, bases, and solvents, while sight glasses enable safe visual monitoring of reaction progress and phase separations. Control valves regulate flow rates in continuous processing applications.

→ Spheron9 ball valve, DN 15 – 200 · up to 16 bar · up to +200 °C · Videron9 sight glass, DN 15 – 250 · 16 bar · up to +150 °C · Imperium9 control valve, DN 15 – 100 · up to 16 bar · up to +180 °C · Purion9 T-strainer, DN 25 – 150 · PN 16 · up to +150 °C

Sampling and Quality Control

In-process sampling is essential for batch release and quality assurance. PFA-lined sample valves take samples from lined lines without opening the system.

→ Provaron9 sample valve, DN 25 – 80 · up to 16 bar · up to +150 °C

Clean-in-Place (CIP) Systems

Pharmaceutical equipment must be thoroughly cleaned between batches to prevent cross-contamination. CIP systems circulate aggressive cleaning agents—including sodium hydroxide, phosphoric acid, and oxidizing sanitizers—through process equipment. PFA-lined valves are used with these cleaning agents; check concentration and temperature against the table and the valve's P-T rating.

→ Spheron9 ball valve, DN 15 – 200 · up to 16 bar · up to +200 °C

Solvent Recovery and Purification

Pharmaceutical facilities recover and purify solvents for reuse. These systems handle concentrated organic compounds at elevated temperatures, requiring valves that maintain integrity without contaminating the recovered solvent streams.

→ Spheron9 ball valve, DN 15 – 200 · up to 16 bar · up to +200 °C · Purion9 T-strainer, DN 25 – 150 · PN 16 · up to +150 °C

Water for Injection (WFI) Systems

Ultra-pure water systems supply pharmaceutical production. Tell us water grade, temperature and sanitisation method and we confirm the fit.

Chemical resistance

Typical media and PFA resistance

MediumFormulaConcentrationMax. temp.Rating
Hydrochloric AcidHClSee resistance guide150 °C Excellent
Sulfuric AcidH₂SO₄See resistance guide200 °C Excellent
Sodium HypochloriteNaOClSee resistance guide100 °C Excellent
Acetic AcidCH₃COOHSee resistance guide150 °C Excellent
DichloromethaneDCMPure40 °C Excellent
EthanolC₂H₅OHSee resistance guide80 °C Excellent

On request: FDA declaration for the PFA wetted parts. USP Class VI documentation also on request. For concentrations and further media see the PFA chemical resistance guide. Temperature limits shown are conservative for continuous service; the valve's own limit is its P-T rating. Contact us for your media and conditions.

Excellent full resistance, continuous service · Good suitable for most applications · Limited check the conditions with us. Ratings refer to the PFA lining; the valve's own pressure–temperature rating also applies.

Products

Clean Room Series for Pharmaceutical Applications

PFA-Lined Ball Valves — Spheron9

PFA-Lined Ball Valves — Spheron9

Full-bore isolation with a one-piece PFA-lined ball-stem and two-stage blow-out protection; manual or actuated.

DN 15 – DN 200 / NPS ½" – 8" · up to 16 bar · −10 °C (1.0619) or −60 °C (1.4408 / 1.4409) up to +200 °C, see P-T diagram · TA-Luft leakage class BH (DN 10 – DN 150, certified −20 °C to +180 °C) · actuator mounting to EN ISO 5211 · clean room version with electropolished 1.4408 (CF8M) body.

View Ball Valve Range →
PFA-Lined Sample Valves — Provaron9

PFA-Lined Sample Valves — Provaron9

Sampling from lined lines without opening the system.

DN 25 – DN 80 / NPS 1" – 4" · up to 16 bar · −10 °C up to +150 °C · clean room version with electropolished 1.4408 (CF8M) body.

View Sample Valve Range →
PFA-Lined Sight Glasses — Videron9

PFA-Lined Sight Glasses — Videron9

Visual control of flow, colour and level in lined lines; a fluoropolymer liner between glass and medium on request.

DN 15 – DN 250 / NPS ½" – 10" · 16 bar · −10 °C up to +150 °C · clean room version with electropolished 1.4408 (CF8M) body.

View Sight Glass Range →
Custom PFA Solutions & Development Partnerships

Custom PFA Solutions & Development Partnerships

Beyond standard valve products, GFT9 offers custom PFA lining solutions for specialized pharmaceutical applications. We work with pharmaceutical equipment manufacturers, engineering firms, and end users to develop application-specific components.

Our engineering team welcomes development partnerships for:
• Custom port configurations and connection types
• Specialized sampling systems for particular process requirements
• Integration with existing pharmaceutical equipment
• Prototype development for new applications

Whether you need a modified standard product or a completely custom solution, contact our engineering team to discuss your requirements.

View Custom Made Solutions →

Quality

Testing and Documentation

  • Every valve is tested before delivery to DIN EN 12266-1.
  • EN 10204 3.1 material certificates with heat numbers.
  • On request: FDA declaration for the PFA wetted parts.
  • Pressure-bearing products designed and manufactured to PED 2014/68/EU; the Spheron9 ball valve additionally certified under Module A2 with notified body 0035 and type-tested to TA-Luft leakage class BH (DN 10 – DN 150, certified −20 °C to +180 °C).
  • Made in Germany · country of origin Germany.

FAQ

Questions we are often asked

Why PFA-lined valves instead of stainless steel in API and purified-water lines?

The wetted path of a PFA-lined valve is fluoropolymer, not metal, so the medium does not touch iron, chromium or nickel surfaces, and acids and caustic cleaning agents do not attack it. For clean areas the Clean Room Series uses electropolished 1.4408 (CF8M) stainless steel bodies.

PFA or PTFE lining — what is the difference?

Both are fully fluorinated plastics with almost universal chemical resistance. PTFE cannot be melted, so PTFE liners are pressed and sintered. PFA can be melted, so we transfer-mould it into the valve body: the lining is dense, anchored in the body and follows complex shapes. If your specification says "PTFE-lined", a PFA-lined valve meets the same chemical duty — ask us for a comparison for your medium.

Which documents come with the valves?

Every valve is tested to DIN EN 12266-1 and ships with EN 10204 3.1 material certificates. Pressure-bearing products are designed and manufactured to PED 2014/68/EU; the Spheron9 ball valve is additionally certified under Module A2 and type-tested to TA-Luft leakage class BH (DN 10 – DN 150, certified −20 °C to +180 °C). On request: FDA declaration for the PFA wetted parts.

Which GFT9 valve goes where in a pharmaceutical plant?

Feed lines: Spheron9 ball valve, DN 15 – 200. Sampling: Provaron9 sample valve, DN 25 – 80. Visual control: Videron9 sight glass, DN 15 – 250. Dosing and pH control: Imperium9 control valve, DN 15 – 100. Clean room versions with electropolished 1.4408 (CF8M) body are available for these lines.

Discuss Your Pharmaceutical Project Requirements

Whether you're specifying components for a new pharmaceutical facility, upgrading existing equipment, or developing custom solutions for specialized applications, our technical team is ready to support your project.

Contact Options:

Email: sales@gft9.shop
Phone: +49 2152 9148591

We support projects from initial specification through delivery, with technical consultation available for material selection, sizing, and application engineering.

Related: Fine chemicals & APIs · Clean rooms · Food & beverage

Contact form