Shut-off · PFA-lined ball valve
PFA-Lined Ball Valve Spheron9
Full bore · 2-way · flanged · DN 15 – 200 / NPS ½" – 8" · PN 16 / Class 150 · for corrosive and high-purity media
- Sizes
- DN 15 – 200 · NPS ½" – 8"
- Pressure
- PN 16 / Class 150 · up to 16 bar
- Temperature
- −60 °C … +200 °C by body material
- Certified
- PED Module A2 · TA-Luft BH
Full-bore ball valve with PFA-lined body and end flange and a one-piece PFA-lined ball-stem — for transfer and loading lines, tank outlets, dosing-line isolation and automated on/off duty. One page for both norms: choose the size (EN or ASME), lining and operation, and send the configuration as a request for quotation.
Features
PFA-lined throughout
Body, end flange and ball are lined; the medium touches fluoropolymer only.
One-piece PFA-lined ball-stem
As standard. Two-piece only for SSiC or Al₂O₃ ceramic balls (DN 15/20).
Two-stage blow-out protection
On all sizes — bottom-entry stem plus retaining washer.
Spring-loaded stem seal
Compensates packing set and thermal relaxation; no scheduled readjustment in normal service.
TA-Luft leakage class BH
To DIN EN ISO 15848-1, DN 10 – 150, certified −20 °C to +180 °C.
PED 2014/68/EU, Module A2
Notified body 0035. CE marking from DN 25 / 1".
Actuator-ready
Mounting to EN ISO 5211; bracket and coupling made to suit the actuator flange.
100 % tested
To DIN EN 12266-1, with EN 10204 3.1 certificates.
Which version for which duty
| Duty | Choose |
|---|---|
| Isolation in transfer and loading lines, tank outlets | Spheron9 with lever or handwheel |
| Automated on/off duty | Electric or pneumatic actuator; EN ISO 5211 mounting |
| Media where electrostatic charge must be led off | PFA/AS (conductive) lining |
| Low temperatures down to −60 °C | Body 1.4408 (CF-8M) |
| Clean rooms, pharma, semiconductor | Spheron9 Clean Room — electropolished 1.4408 body |
| Throttling or regulation | V-control ball on request — or the Imperium9 control valve |
Configure and request a quote
Your configuration
Reference: SPH9-DN015-PFA-LEV
Technical data
| Type | Ball valve, full bore, 2-way, on/off service; lever operated or actuated |
|---|---|
| Sizes | DN 15 – 200 · NPS ½" – 8" |
| Pressure rating | PN 16 / Class 150 — up to 16 bar, see P-T diagram |
| Temperature | −10 °C (1.0619) or −60 °C (1.4408 / 1.4409) up to +200 °C — see P-T diagram. TA-Luft certification valid −20 °C to +180 °C |
| Flanges | EN 1092-1 (PN 16, form B1) · ASME B16.5 (Class 150, RF) |
| Face-to-face | EN 558 Series 1 (PN) · ASME B16.10 (Class) |
| Body | 1.0619 (A216 WCB) or 1.4408 (CF-8M); 1.4409 on request |
| Lining | PFA, PFA/AS (conductive) — FEP, PFA/UP, PVDF, UHMW-PE on request |
| Actuation | EN ISO 5211 — bracket and coupling made to suit the actuator flange |
| Options | Actuation, stem extension, heating jacket, lock; V-control ball on request |
| Testing | 100 % per valve to DIN EN 12266: shell 24 bar, shell and seat tightness 6 bar; EN 10204/3.1. 15 kV spark test on request |
| Certificates | PED 2014/68/EU Module A2, NB 0035 · TA-Luft (8/2021) §5.2.6.4 / DIN EN ISO 15848-1: ISO FE–BH–C03–SSA1–t(−20/+180 °C)–PN16, DN 10 – 150 / ½" – 6" |
| Origin and quality | Made in Germany · country of origin Germany · ISO 9001:2015 certified manufacturing |
Materials
| Pos. | Part | Material |
|---|---|---|
| 1, 2, 10 | Body / End Flange / Gland Follower | 1.0619 (A216 WCB), 1.4408 (CF-8M) |
| 1, 2, 6 | Lining Body / Ball | PFA, FEP, PFA/AS, PFA/UP, PVDF, UHMW-PE* |
| 6 | Ball / Stem | CD4MCuN |
| 7 | Lever | 1.0619 (A216 WCB), 1.4408 (CF-8M) |
| 4 | Seat Rings | PTFE/TFM, PTFE/AS, GF PTFE, o. o. req. |
| 3 | Stem packing | PTFE/TFM, PTFE/AS |
| 8 | Spring Gland Follower | Spring Steel |
| 5 | Thrust Ring | Steel |
| 11 | Earthing Spring | 1.4301 |
| 12 | Retaining Washer | 1.4301 |
| 9, 13–19 | Bolts, Nuts and Washers | Stainless Steel A2, A4, 5.6, o. o. req. |
Wetted parts: lining and ball (PFA or the selected lining material) and seat rings. Further lining materials on request.
Pressure–temperature rating
Pressure-Temperature diagram for GFT9 PFA-lined ball valves up to DN 150, non-vacuum service. DN 200 pressure-temperature data on request. Lower limit set by the body casting: 1.0619 −10 °C, A216 WCB −29 °C, 1.4408 −60 °C.
Dimensions
EN version — EN 1092-1 PN 16, EN 558 Series 1 · mm
| Size | L1 | H1 | ØD | Øk | Ød | n × ØB | Kv m³/h* | Torque 16 bar Nm** | Max. adm. Nm |
|---|---|---|---|---|---|---|---|---|---|
| DN 15 | 130 | 126 | 95 | 65 | 45 | 4 x 14 (M12) | 17.5 | 10 | 80 |
| DN 20 | 150 | 126 | 105 | 75 | 58 | 4 x 14 (M12) | 31 | 10 | 80 |
| DN 25 | 160 | 126 | 115 | 85 | 68 | 4 x 14 (M12) | 75 | 12 | 80 |
| DN 32 | 180 | 126 | 140 | 100 | 78 | 4 x 18 (M16) | 140 | on req. | on req. |
| DN 40 | 200 | 200 | 150 | 110 | 88 | 4 x 18 (M16) | 200 | 25 | 250 |
| DN 50 | 230 | 200 | 165 | 125 | 102 | 4 x 18 (M16) | 310 | 30 | 250 |
| DN 65 | 290 | 220 | 185 | 145 | 122 | 4 x 18 (M16) | 615 | on req. | on req. |
| DN 80 | 310 | 260 | 200 | 160 | 138 | 8 x 18 (M16) | 800 | 80 | 500 |
| DN 100 | 350 | 270 | 220 | 180 | 158 | 8 x 18 (M16) | 1250 | 170 | 500 |
| DN 125 | 400 | — | 250 | 210 | 188 | 8 x 18 (M16) | 2100 | on req. | on req. |
| DN 150 | 480 | — | 285 | 240 | 212 | 8 x 22 (M20) | 2800 | on req. | on req. |
| DN 200 | 600 | — | 340 | 295 | 268 | 12 x 22 (M20) | 6000 | on req. | on req. |
ASME version — ASME B16.5 Class 150 RF, ASME B16.10 · mm
| Size | L1 | H1 | ØD | Øk | Ød | n × ØB | Kv m³/h* | Torque 16 bar Nm** | Max. adm. Nm |
|---|---|---|---|---|---|---|---|---|---|
| NPS ½" | 108 | 126 | 88.9 | 60.3 | 34.9 | 4 x 15.9 | 17.5 | 10 | 80 |
| NPS ¾" | 117 | 126 | 98.4 | 69.8 | 42.9 | 4 x 15.9 | 31 | 10 | 80 |
| NPS 1" | 127 | 200 | 108 | 79.4 | 50.8 | 4 x 15.9 | 75 | 12 | 80 |
| NPS 1½" | 165 | 200 | 127 | 98.4 | 73 | 4 x 15.9 | 200 | 30 | 250 |
| NPS 2" | 178 | 200 | 152.4 | 121 | 92.1 | 4 x 19 | 310 | 30 | 250 |
| NPS 3" | 203 | 260 | 190.5 | 152.4 | 127 | 4 x 19 | 800 | 80 | 500 |
| NPS 4" | 229 | 270 | 228.6 | 190 | 157.2 | 8 x 19 | 1250 | 170 | 500 |
| NPS 6" | 394 | — | 279 | 241 | 216 | 8 x 22.2 | 2800 | on req. | on req. |
| NPS 8" | 457 | — | 342.9 | 298.5 | 269.9 | 8 x 22.2 | 6000 | on req. | on req. |
* Kv indicative, full bore; Cv ≈ 1.156 × Kv. ** Operating torque greased, guide value — size actuators with the usual safety margin; "on req." sizes are confirmed per order. Dimensions nominal — confirm against the certified drawing before piping design. The row of your selected size is highlighted; sizes without a row: dimensions on request.
Documents
Used in
Chemical processingSulfuric acid terminalsChemical storage & tank farmsMining & hydrometallurgyWater treatmentEnergyPharmaceutical & biopharmaSemiconductor
FAQ
Questions we are often asked
Which operation should I choose?
Lever for manual isolation; lever + lock where the valve must not be operated by mistake; handwheel for larger sizes. Electric or pneumatic actuators (with positioner or limit switches) for automated duty. Choose “Bridge for actuator mounting” if you fit your own actuator — mounting to EN ISO 5211.
PFA or PFA/AS lining?
PFA is the standard lining. PFA/AS is the conductive version for media where electrostatic charge must be led off. FEP, PFA/UP, PVDF and UHMW-PE are available on request.
Can the Spheron9 throttle?
It is an on/off valve. A V-control ball is available on request with a longer lead time; for regulation use the Imperium9 control valve.
Which documents come with each valve?
Every valve is tested to DIN EN 12266-1 and ships with EN 10204 3.1 material certificates. The Spheron9 is certified under PED 2014/68/EU Module A2 (CE marking from DN 25 / 1") and type-tested to TA-Luft leakage class BH (DN 10 – 150).
PFA or PTFE lining — what is the difference?
Both are fully fluorinated plastics with almost universal chemical resistance. PTFE cannot be melted, so PTFE liners are pressed and sintered. PFA can be melted, so we transfer-mould it into the valve body: the lining is dense, anchored in the body and follows complex shapes. If your specification says "PTFE-lined", a PFA-lined valve meets the same chemical duty — ask us for a comparison for your medium.
Related
Spheron9 Clean RoomPapilon9 butterfly valve — large linesImperium9 control valveChemical resistance guide