Reverse Engineered Spare Parts for PFA-Lined Magnetic Drive Pumps

Impellers, Containment Shells, Glide Bearings, and Shafts—Engineered to Your Requirements

V GFT9 jsme odborníci na PFA povrchovou úpravu, specializující se na výrobu PFA potažených ventilů, sít a zakázkových dílů. Naše odborné znalosti sahají dále, protože kombinujeme vstřikování PFA s precizním obráběním, což nám umožňuje dodávat širokou škálu náhradních dílů pro čerpadla s PFA povrchem.

Naše produktová řada zahrnuje oběžná kola, kluzná ložiska, ochranné obaly a čerpadlové hřídele, vše kompatibilní s široce používanými čerpadly Richter MNK s magnetickým pohonem. Prostřednictvím reverzního inženýrství, vyvinutého ve spolupráci s naším zákazníkem, jsme rozšířili naše odborné znalosti v těchto oblastech. Naše předchozí zkušenosti s konstrukcí čerpadel s PFA povrchem nám umožnily rychle a přesně vyrábět tyto klíčové komponenty. Rovněž se těšíme na spuštění vlastní řady čerpadel GFT v roce 2025 — kontaktujte nás pro více informací.

We manufacture reverse-engineered spare parts for PFA-lined magnetic drive pumps. Our experience includes components compatible with MNK-type, SCK-type, and similar ISO/DIN standard pump designs.

  • Oběžná kola:

    Navržena pro efektivní přenos kapaliny, snižují riziko kavitace a opotřebení. Naše PFA potažená oběžná kola odolávají chemické korozi a jsou odolnější při vysokých tlakových aplikacích.

    View Impeller Range 

  • Kluzná ložiska:

    Tato ložiska podporují čerpadlový hřídel a zajišťují hladkou rotaci. Navržena tak, aby zvládala vysoká zatížení a snižovala tření, naše ložiska jsou náchylná k opotřebení při práci v abrazivním prostředí, což z nich činí klíčový náhradní díl.

    View Glide Bearings Range 

  • Ochranné obaly:

    Jako bariéra zajišťující bezúdržbový provoz jsou ochranné obaly klíčové v čerpadlech s magnetickým pohonem. Naše obaly jsou navrženy pro vysokou odolnost proti tlaku a chemické odolnosti, což zabraňuje únikům i v extrémních podmínkách.

    View Containment Shell Range 

  • Čerpadlové hřídele:

    Čerpadlové hřídele zajišťují správný přenos točivého momentu bez mechanických těsnění. Naše PFA potažené hřídele jsou vyrobeny s vysokou přesností a jsou odolné proti chemické expozici a zachovávají správné vyrovnání i v náročných podmínkách.

    View Pump Shaft Range 
1 4

Wear and Tear in Magnetic Drive Pumps

Chemical pumps, especially magnetic drive pumps (mag drive pumps) are vital for industries handling corrosive chemicals and high-temperature applications. These pumps use magnetic coupling to eliminate the need for seals, reducing leakage risks. However, wear and tear can significantly affect their lifespan, especially when lined with PFA for chemical protection. Frequent wear occurs in critical components such as impellers, glide bearings, containment shells, and shafts.

Key Reasons for Wear:

Running dry: This can cause the impeller and glide bearings to overheat, leading to expansion and permanent damage.

Solid particulates: Abrasive particles within the fluid can erode containment shells and glide bearings, causing degradation over time.

Permeation: Over time, certain aggressive substances can diffuse through the PFA lining, particularly under high temperatures and pressures, leading to degradation of the underlying metal components such as containment shells.

Thermal cycling: Repeated exposure to extreme temperature changes causes material fatigue, leading to micro-cracks and eventual failure of parts like containment shells and shafts.

Compatible with Leading Magnetic Drive Pump Designs

GFT9 has reverse-engineered spare parts for pumps originally manufactured to ISO/DIN standards by major European suppliers. Our experience includes:

MNK-Type Magnetic Drive Pumps:

These heavy-duty lined mag-drive pumps are widely installed in chemical plants handling corrosive acids, chlor-alkali processes, and high-purity applications. We manufacture compatible:
• Impellers (closed design with back vanes)
• Double containment shell systems (PTFE inner shell, CFK outer shell)
• SSiC glide bearing assemblies
• PFA-lined shafts and rotors

SCK-Type Side Channel Pumps:

Self-priming designs for applications requiring suction lift. We manufacture compatible impellers and containment components.

Block Pump Configurations (MNK-B type):

Close-coupled designs with shared bearing assemblies. Our parts are manufactured to original face-to-face dimensions for direct replacement.

Legal Note

Part numbers and model designations are referenced for identification purposes only. GFT9 manufactures aftermarket replacement parts through reverse engineering and is not affiliated with original equipment manufacturers.

Když si vyberete GFT9 pro vaše náhradní díly, nepořizujete si jen nové komponenty, ale investujete do kvalitnějšího designu a delší životnosti. Naši zákazníci často hledají nezávislost na OEM náhradních dílech kvůli vysokým cenám nebo problémům s dostupností. V GFT9 jsme poskytli nákladově efektivní a technicky pokročilé alternativy s následujícími výhodami:

Faster Delivery, Better Value

When you choose GFT9 for your spare parts, you aren’t just replacing worn-out components—you’re investing in superior quality, enhanced design, and longer-lasting performance. Our clients often seek to break free from the constraints of OEM spare parts due to high prices or availability issues. At GFT9, we’ve provided cost-effective and technically advanced alternatives, offering the following benefits.

Standard Lead Time:

Typical OEM: 10-20 weeks | GFT9 3-5 weeks

Emergency Delivery:

Typical OEM: Often unavailable | GFT9 1-2 weeks (established parts)

Minimum Order:

Typical OEM: Often required | GFT9: Single pieces welcome

Pricing:

Typical OEM: Premium | GFT9: 30-50% savings typical

Customization

Typical OEM: Limited vs. GFT9 Standard practice

Support:

Typical OEM: Distributor-level | GFT9: Direct engineering access

Our lead time advantage comes from in-house manufacturing. Once we've created tooling for your specific part, repeat orders move quickly through our production system. Many customers establish blanket orders with safety stock held at our facility for immediate dispatch.

For completely new parts requiring tooling development, initial lead times are longer—typically 6-8 weeks including engineering and mold production. Subsequent orders then benefit from the faster standard lead times.

Get Started with Your Pump Spare Parts Inquiry

Whether you need a single replacement impeller or want to establish an ongoing supply partnership, our engineering team is ready to help.

Contact Options

Option 1: Send Your Requirements**
Email your OEM part numbers, drawings, or photos to sales@gft9.shop. We typically respond with feasibility and preliminary pricing within 48 hours.

Option 2: Send Your Sample

Ship your worn or failed component to our facility for analysis. We'll measure, photograph, and return your sample with a detailed quotation.

Option 3: Call Us Directly

+49 2152 9148591
Technical discussions available in German and English. We understand your urgency.


GFT9 - Advanced Fluoropolymer Devices GmbH
Hooghe Weg 16
47906 Kempen, Germany

Request Pump Spare Parts Quote

FAQ

  • Q: Are your parts truly compatible with brand-name pumps?

    A: Yes. We reverse engineer from actual pump components or OEM specifications to ensure dimensional compatibility. Many of our customers have been using GFT9 spare parts as replacements for years without issues. That said, we recommend that customers with critical applications discuss their specific requirements with our engineering team before first orders.

  • Q: What information do you need to quote spare parts?

    A: Ideally, the OEM part number or pump model designation. If those aren't available, send us:
    • Physical dimensions (we can work from your measurements)
    • Photos of the existing part• Pump nameplate information
    • Operating conditions (chemical, temperature, pressure)

  • Q: Can you improve on the original design?

    A: Often, yes. Our reverse engineering process includes failure analysis. If your parts are wearing prematurely, we can recommend material upgrades, geometry modifications, or surface treatments to extend service life. This is one of the key advantages of working with an engineering-focused supplier rather than a distributor.

  • Q: What about warranty on aftermarket parts?

    A: GFT9 provides warranty coverage for manufacturing defects. Our parts are inspected and tested before shipment. We also maintain traceability records for material certification when required.

  • Q: Can you integrate with our procurement systems?

    A: Yes. We work with several customers on blanket order arrangements, consignment stock programs, and electronic procurement integration. Our goal is to make reordering as seamless as possible for your maintenance team.

Kontaktujte nás pro více informací